本文圖片、文字由上海淞江減震器集團提供，部分內容參考耐高溫橡膠接頭http://www.60547771.com/284.html感謝您的閱讀與支持?。?！
kxt橡膠接頭是橡膠接頭的一種，也叫做橡膠軟接頭，橡膠減震接頭，它是由膠體和兩片法蘭經過特殊工序、采用氣吹模工藝、再經過高溫硫化制作而成的。
它的使用壓力由原來1.0Mpa～1.6Mpa增加到2.5Mpa～6.0Mpa,特別是在泵閥出口連接的管道和有地基沉降的管道中，防止拉脫是它特有功能，延長了橡膠接頭的使用壽命。
KXT橡膠接頭安裝時執行標準
1、KXT橡膠接頭安裝時拉伸強度和扯斷伸長率的測定，按GB/T528的規定進行。
2、KXT橡膠接頭材質硬度測定，按GB/T531的規定進行，環境溫度下脆性試驗按GB/T1682的規定進行。
3、加工制造硫化過程中橡膠材質與織物簾子布的粘和強度的測定按GB/T532的規定進行。橡膠接頭日常維護防老化標準和維修更換可根據GB/T3512的規定細節進行。
4、KXT型橡膠接頭，材質耐酸、耐堿試驗按GB/T1690的規定進行。（也可根據EPDM三元乙丙橡膠標準執行質量檢測）
5、液壓試驗參照GB/T5563中的6.3的規定進行。真空度試驗參照GB/T5567中的2-5章得有關規定進行。
6、過流生活用水；水質檢驗按GB/T5749和GB/T17219的規定進行。
性能特點
一、體積小、重量輕、彈性好、安裝維修方便。
二、安裝時可產生軸向、橫向、經向、角向位移，不受用戶管道不通心、法蘭不平行的限制。
三、工作時可降低結構傳遞噪音、吸振能力強。
四、用特殊的合成橡膠可耐高溫、耐酸堿、耐油，是化工耐腐蝕管道的理想產品。
五、按照工作壓力可以分為：0.25MPa、0.6MPa、1.0MPa、1.6MPa、2.5MPa五個等級。
行業領導品牌-上海淞江減震集團造有限公司注冊資金5000萬,專業生產橡膠軟接頭、彈簧減震器、金屬軟管,專注減震降噪二十余年,歡迎來廠家實地考察。
This picture and text provided by the Shanghai Songjiang absorber group, is part of the reference http://www.shnxxjjt.com/ thanks for your reading and support!!!
KXT rubber joint is a rubber joint, also called soft rubber joints, rubber damping adapter, it is through special process, the gas blow molding process, and then after high temperature vulcanization production and the colloid and two flanges.
The pressure from the original 1.0MPa ~ 1.6Mpa increased to 2.5MPa ~ 6.0MPa, especially in the valve is connected with the outlet of the pipeline and pipeline in the settlement of the foundation, to prevent the pull off is its special function and prolong the service life of the rubber joint.
Standard for the installation of KXT rubber joints
1, KXT rubber joint installation of tensile strength and elongation were measured according to the provisions of GB/T528.
2, KXT rubber joint material hardness testing, according to the provisions of GB/T531, environmental temperature brittleness test according to the provisions of GB/T1682.
