Jupiter-BBB高鎳鑄鐵焊條
Shield Metal Arc Welding(SMAW - Stick)
For all cast irons - meehanite, ductile, mealleable, gray cast irons, and steel to cast iron with excellent machinability.
適用于所有鑄鐵：Meehanite孕育鑄鐵、球墨鑄鐵、可鍛鑄鐵、灰口鑄鐵，以及鋼和鑄鐵的焊接，焊縫可加工性佳。
Features
亮點
Strength Up To 65,000 psi/448MPa
抗拉強度高達65,000 psi/448MPa
Non-Conductive Coating Eliminates Side Arcing
非導電涂層可消除偏弧
All positions
全位置焊接
Use In Tight Spots
可在狹窄部位使用
Good Arc Visibility
良好的電弧可見性
Great Weld Appearance
出色的焊縫外觀
Soft Stable Arc
軟穩定弧
Weld over Dirt and Oil
可在油污上直接進行焊接
Porosity Free
無氣孔
Easiest cast iron rod to use
極易使用
Excellent Machinability 卓越的可加工性
Coating Will Not Overheat Even On AC 涂層即使在交流電下也不會過熱
Characteristics
特點
Jupiter-BBB has a special non-conductive coating, which permits welding in tight spaces without side arcing. It produces fully machinable deposits and allows simple repair of defective, broken or worn castings, even in deep holes or out-of-position.
Jupiter-BBB has a soft stable arc and low-fuming characteristics that let the welder see and control the arc puddle.
Since Jupiter-BBB can generally be used without preheat, cast parts can often be repaired in place without disassembly.
Jupiter-BBB配有特殊的非導電涂層，可以在狹小的空間內進行焊接，而不會產生偏弧。它產生完全可加工的熔敷層，可以簡單的對有缺陷、斷裂或磨損的鑄件進行修復，即使是在深孔或?qū)擂挝恢玫那闆r下。
Jupiter-BBB具有柔軟穩定的電弧和低煙霧特性，讓焊工易于看到和控制電弧熔池。
由于Jupiter-BBB通?？梢栽跊]有預熱的情況下使用，因此鑄件通?？梢栽诓徊鹦兜那闆r下進行現場修復。
Technical技術規格
Size and Amps AC/DC+(DCEP)
|
Inches |
3/32 |
1/8 |
5/32 |
|
(mm) |
(2.4) |
(3.2) |
(4.0) |
|
Amps |
48-72 |
80-120 |
100-150 |
Best Practices Application 應用
Use medium arc and stringer beads.
使用中等電弧和線狀焊道。
Skip weld to prevent overheating.
跳焊以防止過熱。
Light peening recommended.
建議輕敲擊。
Preheat critical or heavy parts to 500?F(260?C).
將關鍵或重型零件預熱至500?F（260?C） 。
Cool slowly after welding.
焊后緩冷。
