PLC模塊6AG1323-1BH01-2AA0-工控行業信息網(chinagkong.com)-工控行業門戶網站

產品簡介

PLC模塊6AG1323-1BH01-2AA0

產品價格：￥2000

上架日期：2017-02-22 10:07:49

產地：德國

發貨地：上海

供應數量：不限

最少起訂：1臺

瀏覽量：57

點擊詢價 QQ洽談

資料下載：暫無資料下載

其他下載：暫無相關下載

詳細說明

數字量輸入/輸出模塊適用于連接：

標準開關和兩線制接近開關(BERO)
電磁閥、接觸器、小功率電機、燈和電機啟動器

Design

數字量輸入/輸出模塊具有下列機械特性：

緊湊型設計：
- 綠色 LED，用于指示輸入/輸出的信號狀態，
- 插入前連接器
- 前門上的標簽區
- 連接器針腳分配，用于在前門內部進行配線。
安裝簡單：
沒有插槽規則；輸出地址由插槽決定。
當在 ET 200M 中與有源總線模塊一起使用時，可以進行熱插拔，而不會有任何反應。
方便用戶接線

Functions

數字量輸入/輸出模塊轉換

來自過程的外部數字信號電平轉換成控制器內部信號電平
將控制器的內部信號電平轉換成過程所要求的外部信號電平。

SM 327 是一個可升級的I/O模塊。共有16個通道，其中8個通道是固定的，另8個通道可分別用作輸入或輸出。因此，該組和模塊可以靈活地滿足任何組合的需要。

Technical Specifications

Order number		6AG1323-1BH01-2AA0
		SIPLUS SM323 8DE/8DA
Supply voltage
Load voltage L+
● Rated value (DC)		24 V
Input current
from load voltage L+ (without load), max.		40 mA
from backplane bus 5 V DC, max.		40 mA
Power loss
Power loss, typ.		3.5 W
Digital bs
Number of digital bs		8
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Number of simultaneously controllable bs
horizontal installation
— up to 60 °C, max.		8
vertical installation
— up to 40 °C, max.		8
Input voltage
● Type of b voltage		DC
● Rated value (DC)		24 V
● for signal "0"		-30 to +5V
● for signal "1"		13 to 30V
Input current
● for signal "1", typ.		7 mA
Input delay (for rated value of b voltage)
for standard bs
— at "0" to "1", min.		1.2 ms
— at "0" to "1", max.		4.8 ms
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Digital outputs
Number of digital outputs		8
Short-circuit protection		Yes
● Response threshold, typ.		1 A
Limitation of inductive shutdown voltage to		L+ (-53 V)
Controlling a digital b		Yes
Switching capacity of the outputs
● on lamp load, max.		5 W
Load resistance range
● lower limit		48 Ω
● upper limit		4 kΩ
Output voltage
● for signal "1", min.		L+ (-0.8 V)
Output current
● for signal "1" rated value		0.5 A
● for signal "1" permissible range, min.		5 mA
● for signal "1" permissible range, max.		0.6 A
● for signal "1" minimum load current		5 mA
● for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
● "0" to "1", max.		100 μs
● "1" to "0", max.		500 μs
Parallel switching of two outputs
● for uprating		No
● for redundant control of a load		Yes; only outputs of the same group
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		0.5 Hz
● on lamp load, max.		10 Hz
Total current of the outputs (per group)
horizontal installation
— up to 60 °C, max.		4 A
vertical installation
— up to 40 °C, max.		4 A
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Encoder
Connectable encoders
● 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		2 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status inbation
Alarms		No
Diagnostic functions		No
Diagnostics indication LED
● Status indicator digital output (green)		Yes
● Status indicator digital b (green)		Yes
Potential separation
Potential separation digital bs
● between the channels		Yes
● between the channels, in groups of		8
● between the channels and backplane bus		Yes; Optocoupler
Potential separation digital outputs
● between the channels		Yes
● between the channels, in groups of		8
● between the channels and backplane bus		Yes; Optocoupler
Isolation
Isolation tested with		500 V DC
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes; File E239877
FM approval		Yes; CofC 3028431
RCM (berly C-TICK)		Yes
KC approval		Yes
EAC (berly Gost-R)		Yes

請相信上海西皇自動化科技有限公司是您忠誠的長久的合作伙伴，我們?cè)概c廣大客戶攜手向前，共同進步！

久久精品aⅴ无码中文字字幕重口,蜜桃久久久电影,欧美最猛,日韩天天射

Design

Functions

Technical Specifications