WIKA 516.11 516.12 絕壓表 波登管或膜盒式 標準型 80表圓,
AbsoIute Pressure Gauges
Compact Design
With Capsule Element • Model 516.11
With Bourdon Tube • Model 516.12
Service intended
Measurement of absolute pressure excluding the effect of barometric pressure variation.
Suitable for all clean and dry gaseous media that will not attack copper alloy and aluminium parts.
Design
Small compact design, varied possibility for installation, WIKA trade pattern DT-GM 87 10 226 Variable pressure entry
Nominal size
80 mm
Accuracy class per EN 837-3 /6
1.6
Scale ranges per EN 837-3 /5
Model 516.11: 0 ... 16 to 0 ... 1000 mbar absolute pressure
Model 516.12: 0 ... 1.6 to 0 ... 16 bar absolute pressure.
Working pressure
Steady: full scale value
Fluctuating: 0.9 x full scale value
Overpressure safety
Model 516.11: 1 bar absolute (atmospheric pressure) with all scale ranges
Model 516.12: full scale value
Operating temperature
Ambient: -20 ... +60 °C
Medium: +70 °C maximum
Temperature error
Additional error when temperature of the pressure element deviates from +20 °C
Rising temperature: +0.3%/10 K of true scale value
Falling temperature: -0.3%/10 K of true scale value
Degree of protection
IP 66 per EN 60 529 / IEC 529
Standard features
Pressure connection (exposed to pressure medium)
Threaded entry per EN 837-1 /7.3
G E female
Pressure element (exposed to pressure medium)
Model 516.11: Material Cu-alloy
Model 516.12: Material stainless steel
The pressure element is evacuated and constitutes pressure datum
Movement (exposed to pressure medium)
Material: Cu-alloy
Dial (exposed to pressure medium)
White aluminium with black lettering
Pointer (exposed to pressure medium)
Black aluminium pointer
Zero adjustment
Adjusting provisions at case back (model 516.11)
Case (exposed to pressure medium)
Black aluminium. Case retains process pressure
Window (exposed to pressure medium)
Instrument glass
Sealing rings (exposed to pressure medium)
NBR (Buna rubber)
Bezel ring
Black aluminium
Gauge mounting
Requires mounting by means of rigid tailpipes, optionally threaded studs at case back.
Panel mounting or surface mounting rings optionally available
Optional extras
Other pressure connection
Mounting studs with bracket
Panel mounting ring
Surface mounting ring
Male thread pressure entry
Pressure entry with miniature flange DN 10/16 to DIN 28 403
Radial pressure entry other than bottom
Operating principle
- The case machined from solid aluminium bar retaines the system pressure, whereas the pressure element of either the capsule or the bourdon tube type constitutes the zero pressure datum.
- The particularly shaped capsule fully collapses to provide over-pressure safety independent of the scale range.
- Any pressure applied is measured against the sealed pres sure datum to exclude the effect of ambient pressure variation.
Dimensions
Standard version
Ordering inbation
State:
Model / Nominal size / Scale range / Size and b of connection / Optional extras required
歡迎致電咨詢訂購WIKA 516.11 516.12 絕壓表 波登管或膜盒式 標準型 80表圓,
電話:010-51669912 56291930 15910733293
傳真：010-51669912
QQ：823377546 1491421115 2636968574
郵箱:sales@zoriver.cn
