WIKA HIF 水平方向安裝永磁式不銹鋼浮球液位開關 可防爆液位開關
Float Switches with Permanent Magnet
For Horizontal Installation
Model HIF
Float Switches with Permanent Magnet,
for horizontal installation, Model HIF
Fig. top: Stainless steel version
Fig. bottom: Plastic version
Applications
■ Level measurement for almost all liquid media
■ Pump/level control
■ Chemical industry, petrochemical industry, natural gas, offshore, shipbuilding, machine building, power generating equipment, power stations
■ Process water and drinking water treatment, food and beverage industry
Special Features
■ Large scope of application due to the simple, proven functional principle
■ For harsh operating conditions, long service life
■ Operating limits:
- Operating temperature: T = -196 ... +350 °C
- Working pressure: P = vacuum to 100 bar
- Limit S. G.: ρ ≥ 400 kg/m3
■ Wide variety of different electrical connections and materials
■ Explosion-protected versions
Debion
In addition to the various applications for WIKA‘s float switches for vertical installation, the horizontal WIKA float switches likewise offer innumerable possibilities to monitor and/or switch levels in order to indicate minimum/maximum
levels.
The float is attached to a supported, swivelling lever and moves with the level of the medium being measured. By means of a permanent magnet, fixed to the other end of the lever, when a preset switch point is reached, a reed contact (inert gas contact) within the contact pipe is energised.
By using a magnet and reed contact the switching operation is non-contact, free from wear and needs no power supply.
The float switch is simple to mount and maintenance-free, so the costs of mounting, commissioning and operation are low.
Further special features
■ Process connection, contact tube and float made of stainless steel 1.4571 or plastic
■ Universal signal processing:
connection direct to a PLC is possible, NAMUR
connection, signal amplification / contact protection relays
■ Works independently of foaming, conductivity, dielectricity, pressure, vacuum, temperature, steam, condensation, blistering, boiling effects and vibrations
■ Exact repeatability of the switch points
■ Float switches with permanent magnets qualify as passive electrical equipment in accordance with DIN IEC 60 079-11 and can be installed in 'Zone 1' hazardous
areas without certification, so long as the equipment is operated in a certified intrinsically safe circuit with a minimum explosion protection of EEx ib
Options
■ Customer-specific solutions
■ Process connection, contact tube material and float made of titanium or Hasbloy (other materials on request)
歡迎致電咨詢訂購WIKA HIF 水平方向安裝永磁式不銹鋼浮球液位開關 可防爆液位開關
電話:010-51669912 56291930 15910733293
傳真：010-51669912
QQ：823377546 1491421115 2636968574
