M.2 接口，又稱為NGFF (Next Generation Form Factor)，比起mPCIe 可節(jié)省高達40%的使用空間，可完美嵌入各種超薄、精巧的系統(tǒng)配置。
Innodisk M.2 (S42) 3SE3 is designed as the standard M.2 b factor with SATA?interface, and supports SATA III standard (6.0Gb/s) with excellent perbance. The?b factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE3 absoluby replaces?the traditional hard disk and makes personal computer, in any field, smaller and?easier.
Innodisk M.2 (S42) 3SE3 effectively reduces the booting time of operation system and?the power consumption is less than hard disk drive (HDD), and complies with ATA?protocol, no additional drives are required, and can be configured as a boot device or?data storage device.
| Model Name | M.2 (S42) 3SE3 |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | SLC |
| Capacity | 4GB~32GB |
| Max. Channels | 2 |
| Sequential R/W (MB/sec, max.) | 210/110 |
| Max. Power Consumption | 1.2 W (3.3V x 366 mA ) |
| Thermal Sensor | ST- Optional / WT- Default |
| H/W Write Protect | N |
| ATA Security | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 22.0 X 42.0 X 3.5 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature |
Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
| Operation Temp. | 4GB | 8GB | 16GB | 32GB |
|
Standard Grade (0°C ~ +70°C) | DEM24-04GD09SCADB | DEM24-08GD09SCADB | DEM24-16GD09SCADB | DEM24-32GD09SCADB |
|
Industrial Grade (-40°C ~ +85°C) | DEM24-04GD09SWADB | DEM24-08GD09SWADB | DEM24-16GD09SWADB | DEM24-32GD09SWADB |
| Operation Temp. | 4GB | 8GB | 16GB | 32GB |
|
Standard Grade (0°C ~ +70°C) | DEM24-04GD09SCADB | DEM24-08GD09SCADB | DEM24-16GD09SCADB | DEM24-32GD09SCADB |
|
Industrial Grade (-40°C ~ +85°C) | DEM24-04GD09SWADB | DEM24-08GD09SWADB | DEM24-16GD09SWADB | DEM24-32GD09SWADB |
