西門子模塊6ES7288-1SR40-0AA1-工控行業信息網(chinagkong.com)-工控行業門戶網站

產品簡介

西門子模塊6ES7288-1SR40-0AA1

產品價格：￥1400

上架日期：2022-09-29 15:50:28

產地：德國

發貨地：上海松江區

供應數量：不限

最少起訂：1件

瀏覽量：70

點擊詢價 QQ洽談

資料下載：暫無資料下載

其他下載：暫無相關下載

詳細說明

西門子模塊6ES7288-1SR40-0AA1

Active Line Connection Modules?2 comprise a Line Connection Module, an Active Interface Module in chassis?2 bat and an Active Line Module in chassis?2 bat installed in a cabinet system. They can supply motoring energy to the DC b and return regenerative energy to the line supply.

The Active Line Connection Module?2 contains the line-side infeed via main switch and circuit breaker and pre-charging circuit. It connects the line-side supply network and the Active Line Module in chassis?2 bat. It is equipped as standard with a radio interference suppression filter according to EN 61800-3 Category C3.

Active Line Connection Modules?2 generate a controlled DC voltage that is kept consistent regardless of fluctuations in the line voltage (the line voltage must lie within the permissible tolerances).

In the factory setting, the DC voltage is regulated to 1.5 times the rms value of the nominal voltage of the distribution system.

Active Line Connection Modules draw a virtually sinusoidal current from the supply system and cause virtually no line harmonics.

Active Line Connection Modules are suitable for connection to supply systems grounded at the neutral point (TN, TT) and non-grounded (IT) supply systems. The following voltages and currents are available:

Line voltage	Rated infeed/regenerative feedback current	Rated power
380 ... 480 V 3 AC	560 ... 1405 A	355 ... 900 kW

設計

Active Line Connection Modules?2 always include an Active Interface Module in chassis?2 bat, which contains the associated Clean Power Filter and pre-charging circuit. The line filter that is included ensures compliance with the EMC requirements for the "second environment".

Active Line Connection Modules?2 are available for installing the Motor Modules to the right (article number "...RE0") and for installing the Motor Modules to the left (article number "...LE0"). The Line Connection Module with the line connection is installed directly next to the Active Interface Module.

Depending on the b current, the following versions are available:

≤ 800 A: Main circuit breaker with fuse switch disconnector
> 800 A: Circuit breaker, type 3WL, with option L25 as draw-out circuit breaker

Parallel connection for power increase

The power rating can be increased by connecting Active Line Connection Modules?2 in parallel. You must observe the following rules:

Up to 6 identical Active Line Connection Modules?2 can be connected in parallel.
Option M88 must be ordered so that the infeed can be realized at the common DC b.
A common Control Unit is required whenever the modules are connected in parallel. For more than 4 power units, these must be distributed as symmetrically as possible between at least two DRIVE-CLiQ ports (e.g. 3 x 2 Active Line Connection Modules?2 in series or at least 2 x 3 Active Line Connection Modules?2 in series).
The parallel connection must be supplied from a common infeed point, i.e. the modules cannot be operated on different line supplies
A derating factor of 5 % must be taken into consideration, regardless of the number of modules connected in parallel.
The main contactors or circuit breakers of the respective Line Connection Modules must close together and simultaneously. Monitoring is perbed via the -X50 terminals of the respective Line Connection Module

For additional inbation, please refer to the SINAMICS Low Voltage Engineering Manual.

集成

Connection example of an Active Line Connection Module?2 (Line Connection Module)

Connection example of an Active Line Connection Module?2 (Active Interface Module in chassis?2 bat and Active Line Module in chassis?2 bat)

技術規范

Line voltage 380 ... 480 V 3 AC		Active Line Connection Modules?2
		6SL3731-7TE35-6RE01)	6SL3731-7TE36-4RE01)	6SL3731-7TE37-5RE01)	6SL3731-7TE38-4RE01)
		6SL3731-7TE35- 6LE01)	6SL3731-7TE36-4LE01)	6SL3731-7TE37-5LE01)	6SL3731-7TE38-4LE01)
Rated power
At IN DC (50 Hz 400 V)	kW	355	400	450	500
At IL DC (50 Hz 400 V)	kW	300	350	400	450
At IN DC (60 Hz 460 V)	hp	500	550	650	700
At IL DC (60 Hz 460 V)	hp	400	500	550	650
DC b current
Rated current IN DC	A	630	710	835	940
Base-load current IL DC 2)	A	571	649	760	854
Maximum current Imax DC	A	857	974	1140	1281
Infeed/regenerative feedback current
Rated current IN I	A	560	635	745	840
Maximum current Imax I	A	773	878	1028	1155
Pulse frequency	kHz	4	4	4	4
Current demand
24 V DC auxiliary power supply	A	1.5	1.5	1.5	1.5
230 V 1 AC	A	4.1	4.1	4.1	4.1
DC b capacitance
Active Line Module	μF	16450	16450	18800	18800
Drive line-up, max.	μF	250000	250000	250000	250000
Power loss, max. 3)
at 50 Hz 400 V	kW	12.14	12.65	16.38	17.32
at 60 Hz 460 V	kW	12.14	12.65	16.38	17.32
Cooling air requirement	m3/s (ft3/s)	1.3 (45.9)	1.3 (45.9)	1.3 (45.9)	1.3 (45.9)
Sound pressure level LpA 4) (1 m) at 50/60 Hz	dB	75/75	75/75	75/75	75/75
Line supply connection L1, L2, L3		4 x M12	4 x M12	10 x M12	10 x M12
Conductor cross-section, max. (IEC)	mm2	8 × 240	8 × 240	8 × 240	8 × 240
PE/GND connection		PE bar	PE bar	PE bar	PE bar
Busbar cross-section	mm2	600	600	600	600
Conductor cross-section, max. (IEC)	mm2	240	240	240	240
Cable length, max. 5) Shielded/unshielded	m (ft)	3900/5850 (12795/19193)	3900/5850 (12795/19193)	3900/5850 (12795/19193)	3900/5850 (12795/19193)
Degree of protection (standard version)		IP20	IP20	IP20	IP20
Dimensions (standard version)
Width	mm (in)	1600 (63.0)	1600 (63.0)	1600 (63.0)	1600 (63.0)
Height	mm (in)	2200 (86.6)	2200 (86.6)	2200 (86.6)	2200 (86.6)
Depth	mm (in)	600 (23.6)	600 (23.6)	600 (23.6)	600 (23.6)
Weight, approx. (standard version)	kg (lb)	989 (2180)	994 (2191)	1191 (2626)	1192 (2628)
Frame size
Line Connection Module		HL	HL	JL	JL
Active Interface Module		FS2	FS2	FS4	FS4
Active Line Module		FS2	FS2	FS2+	FS2+
Rated short-circuit current according to IEC	kA	50	50	100	100
Minimum short-circuit current 6)	kA	18	18	2	2

1) Article number "...RE0": Motor Modules installed to the right, "...LE0": Motor Modules installed to the left.

2) The base-load current IL DC is based on a duty cycle of 115 % for 60 s or Imax DC for 5 s with a duty cycle duration of 300 s.

3) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

4) Total sound pressure level of Active Interface Module and Active Line Module.

5) Total of all motor cables and DC b. Longer cable lengths for specific configurations are available on request. For additional inbation, please refer to the SINAMICS Low Voltage Engineering Manual. The cable lengths are valid for use in IT systems. When used in TN systems, the cable lengths are shortened to 30 % of the specified value. When used in the TN system and when operating with increased pulse frequency, you will obtain the permitted cable lengths upon request.

6) Current required for reliably triggering protective devices.

Line voltage 380 ... 480 V 3 AC		Active Line Connection Modules?2
		6SL3731-7TE38-8RE01)	6SL3731-7TE41-0RE01)	6SL3731-7TE41-2RE01)	6SL3731-7TE41-3RE01)	6SL3731-7TE41-4RE01)
		6SL3731-7TE38-8LE01)	6SL3731-7TE41-0LE01)	6SL3731-7TE41-2LE01)	6SL3731-7TE41-3LE01)	6SL3731-7TE41-4LE01)
Rated power
At IN DC (50 Hz 400 V)	kW	560	630	710	800	900
At IL DC (50 Hz 400 V)	kW	500	560	630	710	800
At IN DC (60 Hz 460 V)	hp	800	900	1050	1150	1300
At IL DC (60 Hz 460 V)	hp	700	800	900	1000	1150
DC b current
Rated current IN DC	A	1010	1100	1245	1415	1575
Base-load current IL DC 2)	A	915	1004	1131	1287	1431
Maximum current Imax DC	A	1373	1506	1697	1931	2147
Infeed/regenerative feedback current
Rated current IN I	A	900	985	1110	1260	1405
Maximum current Imax I	A	1238	1358	1530	1740	1935
Pulse frequency	kHz	4	4	4	4	4
Current demand
24 V DC auxiliary power supply	A	1.5	1.5	1.5	1.5	1.5
230 V 1 AC	A	4.1	4.1	4.1	4.1	4.1
DC b capacitance
Active Line Module	μF	25900	25900	25900	40800	40800
Drive line-up, max.	μF	250000	250000	250000	250000	250000
Power loss, max. 3)
at 50 Hz 400 V	kW	17.70	18.55	19.62	23.9	26.5
at 60 Hz 460 V	kW	17.70	18.55	19.62	23.9	26.5
Cooling air requirement	m3/s (ft3/s)	1.7 (60.0)	1.7 (60.0)	1.7 (60.0)	1.7 (60.0)	1.7 (60.0)
Sound pressure level LpA 4) (1 m) at 50/60 Hz	dB	75/75	75/75	75/75	75/75	7575
Line supply connection L1, L2, L3		10 x M12	10 x M12	10 x M12	10 x M12	10 x M12
Conductor cross-section, max. (IEC)	mm2	8 × 240	8 × 240	8 × 240	8 × 240	8 × 240
PE/GND connection		PE bar	PE bar	PE bar	PE bar	PE bar
Busbar cross-section	mm2	600	600	600	600	600
Conductor cross-section, max. (IEC)	mm2	240	240	240	240	240
Cable length, max. 5) Shielded/unshielded	m (ft)	3900/5850 (12795/19193)	3900/5850 (12795/19193)	3900/5850 (12795/19193)	3900/5850 (12795/19193)	3900/5850 (12795/19193)
Degree of protection (standard version)		IP20	IP20	IP20	IP20	IP20
Dimensions (standard version)
Width	mm (in)	1800 (70.9)	1800 (70.9)	1800 (70.9)	1800 (70.9)	1800 (70.9)
Height	mm (in)	2200 (86.6)	2200 (86.6)	2200 (86.6)	2200 (86.6)	2200 (86.6)
Depth	mm (in)	600 (23.6)	600 (23.6)	600 (23.6)	600 (23.6)	600 (23.6)
Weight, approx. (standard version)	kg (lb)	1264 (2787)	1345 (2965)	1406 (3100)	1509 (3326)	1529 (3371)
Frame size
Line Connection Module		JL	JL	JL	JL	JL
Active Interface Module		FS4	FS4	FS4	FS4	FS4
Active Line Module		FS4	FS4	FS4	FS4+	FS4+
Rated short-circuit current according to IEC	kA	100	100	100	100	100
Minimum short-circuit current 6)	kA	2	2.5	2.5	3.2	3.2

1) Article number "...RE0": Motor Modules installed to the right, "...LE0": Motor Modules installed to the left.

2) The base-load current IL DC is based on a duty cycle of 115 % for 60 s or Imax DC for 5 s with a duty cycle duration of 300 s.

3) The specified power loss represents the maximum value at 100 % utilization. The value is lower under normal operating conditions.

4) Total sound pressure level of Active Interface Module and Active Line Module.

6) Current required for reliably triggering protective devices.

在線詢盤/留言

*您的姓名：

*聯系手機：

固定電話：

*聯系郵箱：

所在單位：

*需求數量：

*咨詢內容：

您要求給廠家提供：

免責聲明：以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，本網對此不承擔任何保證責任。我們?cè)瓌t 上建議您選擇本網高級會員或VIP會員。

企業信息

潯之漫智控技術（上海）有限公司

會員級別：

------------ 聯系方式 ------------

聯系人：顏娟（小姐）

聯系電話：021-15021292620

聯系手機：15021292620

傳真號碼：021-021-33556143

企業郵箱：2799536152@qq.com

網址：yan6789.jdzj.com

郵編：416000

企業網站

進入商鋪

最新供應

推薦供應

久久精品aⅴ无码中文字字幕重口,蜜桃久久久电影,欧美最猛,日韩天天射

設計

Parallel connection for power increase

集成

技術規范