久久精品aⅴ无码中文字字幕重口,蜜桃久久久电影,欧美最猛,日韩天天射

西門子的經典分析儀系列 6 已在全球客戶公司使用多年并久經考驗。

ULTRAMAT 6

可以用于測量紅外線激活成分的高選擇性測量，如測量 CO, CO2, NO, SO2, NH3, H2O, CH4 和其它碳?xì)浠衔?。ULTRAMAT 6 是一款 19 英寸形式的高端分析儀，外殼十分堅固，適合在惡劣環境中使用。通常，其應用領域包括過程領域中使用的所有類型的排放測量。這些分析儀可用于控制生產過程和保證產品質量，即使存在高腐蝕性的氣體時也如此。

ULTRAMAT/OXYMAT 6

用于在復雜應用中對紅外線激活成分和樣氣進行組合測量。

OXYMAT 6

用于在復雜應用中根據順磁性原理測量氧氣濃度。OXYMAT 6 可按照順磁交變壓力原理來測量氧氣。這種測量可保證絕對線性度，并能在一個裝置中使用 0-0.5% 的超低量程（檢測限為 50 vpm）、最多可達0-100% 甚至 99.5-100% 。
氣路中所采用的材料允許分析儀測量腐蝕性混合氣體。檢測器單元不與樣氣接觸，從而可在惡劣環境中使用，同時保證較長使用壽命。

OXYMAT 61

用于在標準應用中根據順磁性原理測量氧氣濃度。環境空氣可用作 OXYMAT 61 的參比氣體?？諝馐怯杉稍诜治鰞x外殼內的一個泵提供的。

OXYMAT 64

用于通過 ZrO2 傳感器測定跟蹤范圍內的氧氣濃度。OXYMAT 64 可用于測量濃度極低的氧濃度，測量的濃度可低至 0-10 vpm 量程。在空氣分離系統中，這種測量能力尤其令人感興趣。根據具體應用，可以選擇催化惰性 ZrO2 傳感器或催化活性 ZrO2 傳感器。

CALOMAT 6

適合通過測量導熱率來測定數字混合物中氫氣和惰性氣體濃度。CALOMAT 6 具有高動態測量范圍（例如，0 … 1% 和 0 … 100% H2，可設置）以及較短的 T90 時間。

CALOMAT 62

CALOMAT 62 是一種專門針對含有腐蝕性氣體的應用設計的熱導率分析儀。它可以直接測量 Cl2、HCl 和 NH3 等氣體組分的濃度，并可以測量腐蝕性氣氛中 H2 和 N2 等氣體的濃度。

FIDAMAT 6

用于根據火焰電離原理測量總烴量。
FIDAMAT 型分析儀的應用領域變化很大。它既可以監視超純氣體中的痕量烴類（因?yàn)樗直媛矢撸憫?yīng)因子的差別較?。?，又可以測量 % 濃度范圍的總烴。
樣氣氣路和檢測器的工作溫度可在很寬范圍調節，這樣也可以在高達 100% 的水蒸氣濃度下測量高沸點混合物和烴類。

TULTRAMAT 6 型單通道或雙通道紅外氣體分析儀，采用交變 NDIR 雙光束測量原理，具有高度的選擇性，測量那些紅外吸收波段在 2~9 μm 范圍內的氣體，例如：CO，CO2, NO, SO2, NH3, H2O as well as CH4 以及其它碳?xì)浠衔铩?

單通道分析儀可同時測量最多 2 個氣體組分，而雙通道分析儀可同時測量 3 個（或 4 個，根據要求）氣體組分。

High selectivity with double-layer detector and optical coupler

• Reliable measurements even in complex gas mixtures

Low detection limits

• Measurements with low concentrations

Corrosion-resistant materials in gas path (option)

• Measurement possible in highly corrosive sample gases

Analyzer cells can be cleaned as required on site

• Cost savings due to reuse after contamination

Electronics and physics: gas-tight isolation, purging is possible, IP65

• Long service life even in harsh environments

Heated versions (option)

• Use also in presence of gases condensing at low temperature

Ex(p) for Zones 1 and 2 (in accordance with to ATEX 2G and ATEX 3G)

• Measurement for boiler control in combustion plants
• Emission measurements in combustion plants
• Measurement in the automotive industry (test benches)
• Warning equipment
• Process gas concentrations in chemical plants
• Trace measurements in pure gas processes
• Environmental protection
• TLV (Threshold Limit Value) monitoring at the workplace
• Quality monitoring
• Ex versions for analyzing flammable and non-flammable gases or vapors for use in hazardous areas

Special versions

Special applications

Besides the standard combinations, special applications concerning material in the gas path, material in the sample chambers (e.g. Titan, Hasbloy C22) and measured components are also available on request

Perbance-tested version / QAL

For measurements of CO, NO, SO2 and O2 according to sections 13 and 27 of the German Federal Immission Protection Regulations and TA Luft, perbance-tested versions according to EN 15267 are available.

Certified measuring range:

• 1-component analyzer
  CO: 0 to 75 mg/m3; 0 to 10 000 mg/m3
  NO: 0 to 100 mg/m3; 0 to 10 000 mg/m3
  SO2: 0 to 75 mg/m3; 0 to 1 500 mg/m3
• O2: 0 to 5 vol.%; 0 to 25 vol.%

In addition, perbance-tested versions of the ULTRAMAT 6 meet the requirements set forth in EN 14956 and QAL1 according to EN 14181. Conbity of the analyzers with both standards is TüV-certified.

Determination of the analyzer drift according to EN 14181 (QAL3) can be carried out manually or also with a PC using the SIPROM GA maintenance and servicing software. In addition, selected manufacturers of emission buation computers offer the possibility for downloading the drift data via the analyzer's serial interface and to automatically record and process it in the buation computer.

Flow-type reference cell

• The flow through the reference cell should be adapted to the sample gas flow
• The gas supply of the reduced flow-type reference cell should have a primary pressure of 3 000 to 5 000 hPa (abs.). The flow is then automatically regulated at approximaby 8 ml/min using a restrictor

19" rack unit

• 19" rack unit with 4 U for installation
  • In hinged frame
  • In cabinets with or without bescopic rails
• Front plate can be swung down for servicing purposes (laptop connection)
• Internal gas paths: hose made of FKM (Viton) or pipe made of titanium or stainless steel
• Gas connections for sample gas inlet and outlet: pipe diameter 6 mm or 1/4"
• Flow indicator for sample gas on front plate (option)
• Pressure switch in sample gas path for flow monitoring (option)

Field device

• Two-door enclosure with gas-tight separation of the electronics modules from parts conveying gas
• Individually purgeable enclosure halves
• Parts in contact with sample gas can be heated up to 65 °C (option)
• Gas path: hose made of FKM (Viton) or pipe made of titanium or stainless steel (further materials possible as special applications)
• Gas connections for sample gas inlet and outlet: pipe union for pipe diameter 6 mm or 1/4"
• Purging gas connections: pipe diameter 10 mm or 3/8"

Display and operator panel

• Large LCD panel for simultaneous display of:
  • Measured value (digital and analog displays)
  • Status bar
  • Measuring ranges
• Contrast of LCD panel adjustable using menu
• Washable membrane keyboard with five softkeys
• Menu-driven operation for beterization, test functions, adjustment
• User help in plain text
• Graphic display of concentration trend; programmable time intervals
• Bilingual operating software:
  German/English, English/Spanish, French/English, Italian/English, Spanish/English

Inputs and outputs

• One analog output per medium (from 0, 2, 4 to 20 mA; NAMUR beterizable)
• Two analog bs freely configurable (e.g. correction of cross-interference or external pressure sensor)
• Six digital bs freely configurable (e.g. for measuring range switchover, processing of external signals from sample preparation)
• Six relay outputs freely configurable e.g. for fault, maintenance demanded, limit alarm, external solenoid valves
• Expandable with eight additional digital bs and eight additional relay outputs e.g. for autocalibration with up to four calibration gases

Communication

RS 485 present in the basic unit (connection at the rear; for the rack unit also behind the front plate).

Options

• AK interface for the automotive industry with extended functions
• RS 485/RS 232 converter
• RS 485/Ethernet converter
• RS 485/USB converter
• Connection to networks via PROFIBUS DP/PA interface
• SIPROM GA software as the service and maintenance tool

ULTRAMAT 6, membrane keyboard and graphic display

Designs – Parts wetted by sample gas, standard

Options

Versions – Parts wetted by sample gas, special applications (examples)

Gas path (19" rack unit)

Gas path ULTRAMAT 6, single-channel unit, 19" rack unit, with flow-type reference cell (option)

Gas path ULTRAMAT 6, dual-channel unit, 19" rack unit

Gas path (field device)

Gas path ULTRAMAT 6, field device, with flow-type reference cell (option)