HA34e/315-4 HAX34P/315-4 HAX4/310-4
福州天行健provide原廠GEA-Bock船用壓縮機(jī)及壓縮機(jī)零部件
福州天行健節(jié)能科技有限公司提供歐美日船舶原裝進(jìn)口品牌零部件
HA single-stage compressors
The HA-system - the best solution for deep-freezing!
Special features:
- Direct intake with external ventilation
- Suction gas intake directly into the compressor
- Motor cooled by an integrated ventilation unit
This reduces the compressed gas temperature and thus expands the range of application while at the same time increasing capacity (deep-freeze, R22, R404A). At the same time, the compressor is physically separated from the compressor, with advantages particularly in the case of motor damage.
HAX34e/315-4
Application Refrigeration & AC
Compressor refrigeration capacity 4.64 kW
Power consumption 3.38 kW
Current draw (400 V) 6.66 A
Mass flow 0.035 kg/s
at following operating condition:
Refrigerant R404A, R507
Reference temperature Dew point
Evaporating temperature -35.0 °C
Condensing temperature 40.0 °C
Supply frequency 50 Hz
Voltage 400 V
Suction gas temperature 20 °C
Subcooling (outside cond.) 0 K
Number of cylinders / Bore / Stroke 4 / 50 mm / 40 mm
Displacement 50/60 Hz (1450/1740 1/min) 27,30 / 32,80 m3/h
Voltage 1) 220-240V Δ / 380-420V Y -3- 50Hz
265-290V Δ / 440-480V Y -3- 60Hz
Max. working current 2) 17.1 / 9.9 A
Max. power consumption 2) 5.8 kW
Starting current (rotor blocked) 2) 111.0 / 64.0 A
Motor protection INT69 G
Protection terminal box / HA-fan IP 66 / IP 44
Voltage HA-fan 230 V - 1 - 50/60 Hz, 38 W
Weight 96 kg
Max. permissible overpressure (g) (LP/HP) 3) 19 / 28 bar
Connection suction line SV 22 mm - 7/8 "
Connection discharge line DV 16 mm - 5/8 "
Lubrication Oil pump
Oil type R134a, R404A, R407A/C/F, R448A, R449A, R450A, R513A BOCKlub E55
Oil type R22 BOCKlub A46
Oil charge 1,3 Ltr.
Dimensions Length / Width / Height 578 / 303 / 318 mm
Scope of supply
Semi-hermetic four cylinder reciprocating compressor with drive motor
Single-section compressor housing with hermetically integrated electric motor
Oil pump
Motor is cooled by an integrated ventilator with air deflection hood.
230 V - 1 - 50/60 Hz, 38 W, 0,17 A
Winding protection with PTC resistor sensors and electronic trigger unit INT69 G
115-230 V AC, 50/60 Hz, IP00
Possibility of connection of oil level controllers ESK, Traxoil, AC+R or CARLY 4)
Oil charge:
HA: BOCKlub A46
HAX: BOCKlub E55
Sight glass
Suction and discharge line valve
Inert gas charge
4 anti-vibration pads enclosed
Accessories
Start unloader by means of a ESS (Electronic Soft Start), 400 V - 3 - 50/60 Hz, IP20 (Connection clamps IP00) for installation in switch cabinet
Digital capacity regulator DCR14 230 V - 1 - 50/60 Hz, IP65
1 digital capacity regulator = 50% residual capacity
Cylinder cover prepared for digital capacity regulator
Oil sump heater
110-240 V - 1 - 50/60 Hz, 50-120 W, IP66
PTC heater self-regulating
USB converter for INT69 G Diagnose 5)
Thermal protection thermostat per cylinder cover 6)
Oil pressure safety switch MP55 230 V - 1 - 50/60 Hz, IP20 5)
INT69 G Diagnose 115-230 V AC, 50/60 Hz, IP00 (INT69 G not applicable)
DP-Modbus Gateway 115-230 V AC, 50/60 Hz, IP00 including adapter cable 5)
Modbus-LAN Gateway 230 V AC, 50/60 Hz, IP00 5)
Step protection
Special voltage and/or frequency (on request)
Notes
1) Tolerance (± 10%) relates to the mean value of the voltage range. Other voltages and current types on request
All data are based on voltage rms values
2) - The stated value for the max. power consumption is valid for the adjusted power supply.
- Starting current (rotor blocked):
Part winding (PW) motors: Winding 1 / Winding 1+2
Delta/Star (Δ/Y) motors: Δ / Y
- Take account of the max. operating current / max. power consumption for designing fuses, supply lines and safety devices. Fuse: Consumption category AC3.
3) LP = Low pressure
HP = High pressure
4) Only with additional adapter possible
5) Enclosure
6) Mounted
