高性能標準電源,適用于三相電網 3 AC 400-500 V,通過 Extra Power 提供高過載能力,電流可達額定電流的 1.5 倍(持續 5 s),持續 120% 輸出功率,+45℃ 環境溫度。
Power supply, type |
10 A |
---|---|
Order No. |
6EP1 434-2BA10 |
Input |
3-phase AC |
Rated voltage Uin rated |
400-500 V AC |
Voltage range |
340 ... 550 V |
Overvoltage strength |
2.3 x Uin rated, 1.3 ms |
Mains buffering at Iout rated |
> 6 ms/typ. 14 ms at Uin = 400 V |
Rated line frequency, rated line frequency range |
50/60 Hz; 47 ... 63 Hz |
Rated current Iinrated |
0.7-0.5 A |
Switch-on current limitation (+25 °C) |
< 36 A |
I2 t |
< 0.9 A2s |
Built-in incoming fuse |
None |
Required protection in the mains supply conductor |
3-pole coupled miniature circuit breaker 6 ... 16 A Characteristic C or circuit breaker 3RV2011-1DA10, setting 3 A or 3RV2711-1DD10 (UL 489) |
Output |
Controlled, isolated DC voltage |
Rated voltage Uout rated |
24 V DC |
Total tolerance |
±3 % |
|
Approx. ±0.5 % |
|
Approx. ±1% |
Residual ripple |
< 150 mVpp |
Spikes (bandb approx. 20 MHz) |
< 240 mVpp |
Adjustment range |
24 ... 28.0 V (max. 240 W) |
Status indicator |
24 V OK = green LED |
Signaling |
Relay contact (NO contact, rating 60 V DC/0.3 A) for 24 V OK |
On/Off behavior |
No overshoot of Uout (soft start) |
Startup delay / |
< 1.5 s/typ. 30 ms |
Rated current Iout rated |
10 A |
Current range |
|
|
0 ... 10 A (up to +70°C) |
|
12 A (to +45 °C) |
Dynamic overcurrent on |
|
|
Approx. 16 A for 100 ms |
|
Approx. 16 A for 100 ms |
Parallel switching for enhanced perbance |
Yes, 2 units |
Efficiency |
|
Efficiency at Uout rated, Iout rated |
Approx. 91 % |
Power loss at Uout rated, Iout rated |
Approx. 24 W |
Closed-loop control |
|
Dynamic line smoothing (Uin rated ±15%) |
< 3 % Uout |
Dynamic load smoothing (Iout: 50/100/50 %) |
Typ. ±3% Uout |
Load step settling time |
|
|
< 10 ms (typ. 2 ms) |
|
< 10 ms (typ. 2 ms) |
Protection and monitoring |
|
Output overvoltage protection |
Yes, according to EN 60950 |
Current limitation |
Typ. 11 A, overload capability 150%Iout rated up to 5 s/min |
Short-circuit protection |
Electronic shutdown, automatic restart |
Sustained short-circuit current rms value |
Approx. 3.2 A |
Overload/short-circuit indicator |
- |
Safety |
|
Primary/secondary isolation |
Yes, safety extra low output voltage Uout according to EN 60950-1 and EN 50178 |
Safety class |
Class I |
Leakage current |
< 3.5 mA (typ. 1 mA) |
Safety test |
Yes; CB scheme |
CE marking |
Yes |
UL/cUL (CSA) approval |
cULus-listed (UL 508, CSA 22.2 No. 107.1), File E197259 |
Protection against explosion |
ATEX EX II 3G Ex nAC IIC T4 |
Degree of protection (EN 60529) |
IP20 |
EMC |
|
Emitted interference |
EN 55022 Class B |
Supply harmonics limitation |
EN 61000-3-2 |
Noise immunity |
EN 61000-6-2 |
Operating data |
|
Ambient temperature range |
0 ... +70 °C with natural convection |
Transport and storage temperature range |
-40 ... +85°C |
Humidity class |
Climate class 3K3 according to |
Mechanics |
|
Connections |
|
|
1 screw-type terminal each for 0.2 ... 4 mm2 solid/finely stranded |
|
2 screw-type terminals for 0.2 ... 4 mm2 |
|
2 screw-type terminals for 0.2 ... 4 mm2 |
|
2 screw-type terminals for 0.14 ... 1.5 mm2 |
Dimensions (W x H x D) in mm |
90 x 145 x 150 |
Weight, approx. |
1.6 kg |
Mounting |
Can be snapped onto standard mounting rail EN 60715 35x7.5/15 |
Accessories |
Device labeling plates (3RT1900-1SB20) |
訂貨號:
6EP1 434-2BA10