執行器—傳感器接口和最低現場級的網絡系統具有易于組裝和安裝的特點。專門為 AS-Interface 開發出了一種新的連接工藝
使用 AS-Interface 電纜將站連接起來。這種雙芯 AS-Interface 電纜具有梯形輪廓以防止接錯極性。
電纜利用絕緣穿剌工藝進行連接。刀片形接點滲透進成型的 AS-Interface 與兩根芯線形成可靠的連接。芯線不需要切割與剝線。這種工藝允許 AS-Interface 站(例如 I/O 模塊、智能設備)在最短時間內連接。裝置也能立即被替換。
可提供不同材料的 AS-Interface 電纜(橡膠、TPE、PUR)以適應廣泛的環境條件(例如油性大氣環境)。
符合 AS-i 技術規范的非屏蔽標準圓形電纜 (H05VV?F 2 x 1.5 mm2)也可用于特殊應用。
經由 AS-Interface,可通過黃色 AS-Interface 電纜,傳輸數據以及為傳感器(如接近開關)和執行器(如指示燈)供電。
對于 24 VDC 執行器(如電磁閥)和大功率要求,必須使用黑色 AS?Interface 電纜。
在以下條件下,在一個拖鏈測試中對帶 TPE 和 PUR 外護套的 AS-Interface 電纜的使用進行了檢查:
拖鏈測試 |
||
---|---|---|
拖鏈長度 |
m |
6 |
行程 |
m |
10 |
彎曲半徑 |
mm |
75 |
行程速度 |
m/s |
4 |
加速度 |
m/s2 |
4 |
動作次數 |
1000 萬次 |
|
測試持續時間 |
≈ 3 年(每天 11,000 次循環) |
在 1000 萬次循環結束之后,只看到拖鏈的凸緣所引起的輕微磨損。未能檢測到對纖芯和纖芯絕緣造成的損壞。
《產品優勢》:專業銷售 薄利多銷 信譽好,口碑好,價格低,貨期短,大量現貨,服務周到!
SIMATIC TOP connect for S7-1500/ ET200 MP, fully modular connection Flexible connectionFlexible connection with front connectors is available with 20 (Pin1 – 20) or 40 wired single cores. These are available in lengths from 2.5 m to 10.0 m. The single cores are available in different versions:
The blue wires are numbered sequentially and can be routed direct to each element in the control cabinet. The numbering of the single cores corresponds to the coding of the front connector contacts. In comparison to conventional single wiring, there is a cost saving of 50% for assembly, since the single cores that have already been checked on the connector are fixed. Thus no complex pre-assembly of up to two times 20 single cores per module is necessary. SIMATIC TOP connect for S7-1500/ ET200 MP, flexible connection ![]() |
全部關于 System cabling for SIMATIC S7-1500 and ET 200MP
|